Kenwood DVF-J6050 User Manual
Page 77
77
Chapter 7 : Various Setups
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Chapter 5
Chapter 6
Chapter 7
Chapter 8
Icon
Function
Icon
Means
Initial Position
DV-5900M
Other
Operation procedure
1.
While the player is in stop mode, press the SET UP
button and press the cursor up, down button to display
the "SOUND" menu of "SET UP MENU".
2.
Press the ENTER button to open the setup screen.
(DV-5900M)
3.
In the setup menu, select the Function Item (refer to
Right Table) by pressing the cursor up or down button
and press the ENTER button.
4.
Select the Setting Item (refer to Right Table) by
pressing the cursor up or down button, then press
the ENTER button to enter the selection in memory.
¶ " " : Select to return to the previous screen.
Switches on/off the audio during
search.
÷ Audio is output only in the first
speed step of fast forward.
Audio During
Search
On
Off
On
|
Switches the dynamic range
control function.
This function compress the
difference between max. and min.
volume, and makes it easier to
listen dialogue at low volume.
This function only works with
Dolby Digital DVD.
Dynamic Range
Control
Wide
Normal
Midnight
Normal
|
This function is OFF. Set plays the
audio at the level recorded in the
disc.
This function works with Low
compression ratio.
This function works with High
compression ratio.
Protection for the connected
speakers.
Audio Filter
(DV-5900M
only)
Filter 60 kHz
Filter 110 kHz
Select this position when the
speakers are not suitable for high
frequency response.
Select this position when the
speakers are suitable for high
frequency response.
Filter 60 kHz
Table : SET UP MENU “SOUND” Function & Setting (2/2)
Function Item
Setting Item
–
EXIT
MENU
Digital Audio
Dolby Digital
Speaker Setting (Custom)
Speaker Setting (Quick)
Audio During Search
Dynamic Range Control
Audio Filter
DTS
MPEG
PCM Down Conversion
SOUND
7
On
7
Bitstream
7
Bitstream
7
Bitstream
7
On
7
Wide
7
Filter 60kHz