Kenwood DVF-J6050 - Manual (Page 78)

78
Chapter 7 : Various Setups
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Chapter 5
Chapter 6
Chapter 7
Chapter 8
7-4-2 "Speaker Setting" (DV-5900M only)
This unit has two kinds of speaker setting methods.
"Speaker Setting Custom" k
This is the normal setting operation.
"Speaker Setting Quick" ;
This is the simplified setting operation.
a : Speaker Setting Custom
At the factory, the player has been set to the standard
setting with which the speakers can reproduce the 6-
channel signals as soon as the connections are made.
This setting can be changed according to each listening
environment. When you want to change this setting, be
sure to perform it in the listening area in your own
listening environment.
Center speaker C
Size
Delay
Time
Level
L ch surround speaker
R ch surround speaker
SL
SR
Normal
Large
Icon Speaker Icon Function
Initial
Position
Means
Center channel output
ON/OFF
Low cut filter
L ch front speaker
R ch front speaker
L
R
Size Low cut filter Large
Select this position when
speaker is incapable of
reproduce audio below 100 Hz.
Icon
Select this position when
speaker is capable of reproduce
audio below 100 Hz.
Speaker Item Function Item Setting Item
Off
Normal
Large
No center channel output.
Select when Center speaker is
not used.
Select this position when
speaker is incapable of
reproduce audio below 100 Hz.
Select this position when
speaker is capable of reproduce
audio below 100 Hz.
Large
Set delay time
See “Delay Time Setting”
A
Set the volume level
0/1.3/2.6/
3.9/5.3
––
––
0 ms
0 dB 0 to -12 dB
Size
Delay
Time
Level
Surround channel output
ON/OFF
Low cut filter
Off
Normal
Large
No surround channel output.
Select when Surround speaker is
not used.
Select this position when
speaker is incapable of
reproduce audio below 100 Hz.
Select this position when
speaker is capable of reproduce
audio below 100 Hz.
Large
Set delay time
See “Delay Time Setting”
A
Set the volume level
0/5.3/10.6/
15.9 0 ms
0 dB 0 to -12 dB
––
––
Table : “Speaker Setting CUSTOM” Function & Setting (1/2)
Level Set the volume level 0 to -12 dB –– 0 dB
Operation procedure
1. While the player is in stop mode, press the SET UP
button and press the cursor up, down button to display
the “SOUND” menu of “SET UP MENU”.
2. Press the ENTER button to open the setup screen.
3. Press the cursor up, down button to select “Speaker
Setting (Custom)” in set up menu “SOUND”, then
press the ENTER button.