Kenwood DVF-J6050 User Manual
Page 79
79
Chapter 7 : Various Setups
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Chapter 5
Chapter 6
Chapter 7
Chapter 8
Table : “Speaker Setting CUSTOM” Function & Setting (2/2)
Level
Off
On
Icon
Speaker
Icon
Function
Initial
Position
Means
Subwoofer
SW
Size
Subwoofer channel
output ON/OFF
On
Select when Subwoofer is not
used.
Icon
Select when Subwoofer is used.
Speaker Item
Function Item
Setting Item
Set the volume level
––
0 to -12 dB
÷ For the "Speaker Setting" when an AV amplifier is
connected digitally to the player, refer to the
instruction manual of the AV amplifier.
÷ Note on the Speaker Level adjustment.
When a set of speaker(s) is installed, it is
recommended to adjust the level using the Test
Tone.
;
Test
SL
C
SW
R
R
SR
SL
SR
Exit
L
L
SW
C
Speaker Setting (Custom)
0 dB
0 dB
0 dB
0 dB
0 ms
SL
R
SR
0 ms
0 dB
0 dB
L
SW
C
4.
Select the Speaker item (refer to the table on the right)
and press the ENTER button.
5.
Select the Function item (refer to the table on the right)
and press the ENTER button.
6.
Select the Setting item (refer to the table on the right)
and press the ENTER button.
7.
Repeat steps 4 to 6 as required.
8.
Press the cursor button to select “Exit”, then press
the ENTER button.
0 dB