Kenwood DVF-J6050 - Manual (Page 76)

76
Chapter 7 : Various Setups
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Chapter 5
Chapter 6
Chapter 7
Chapter 8
7-4 "SOUND" Setting
7-4-1 When "SOUND" is selected in "SET UP
MENU":
"SOUND" is to be selected when you want to set the
audio output method when system components are
connected using the digital audio output connector of
the player.
When the system is connected using the 6CH. OUTPUT
jacks of the player, also select "SOUND" to set the
speakers, audio output during DVD or VCD search,
dynamic range control function and audio filters. (DV-
5900M only)
Operation procedure
1. While the player is in stop mode, press the SET UP
button and press the cursor up, down button to display
the "SOUND" menu of "SET UP MENU".
2. Press the ENTER button to open the setup screen.
(DV-5900M)
3. In the setup menu, select the Function Item (refer to
Right Table) by pressing the cursor up or down button
and press the ENTER button.
4. Select the Setting Item (refer to Right Table) by
pressing the cursor up or down button, then press
the ENTER button to enter the selection in memory.
¶ " " : Select to return to the previous screen.
Switches on/off the down-
sampling conversion for the digital
signal output with a high sampling
rate. Digital Audio
“PCM Down
Conversion” On
Off On |
Icon Function Icon Means
Initial Position
DV-5900M Other
Down-convert the signal to 44.1
kHz/16-bit PCM signal.
The analog output signals are
converted accordingly.
Skip down conversion.
Sets the Dolby Digital output. Digital Audio
“Dolby Digital” Bitstream
PCM
Bitstream signal.
48 kHz (2CH.) PCM signal.
Bitstream |
Sets the DTS output.
DV-5900M
Other
Digital Audio
“DTS”
Bitstream
PCM
Bitstream signal.
48 kHz (2CH.) PCM signal.
Bitstream
÷ With DVD AUDIO discs, the
signal is always output after
down sampling conversion.
÷ If the disc inhibits the 96 kHz
digital output, the signal is
down-converted even when this
setting is selected.
Sets the MPEG output. Digital Audio
“MPEG” Bitstream
PCM
Bitstream
|
Speaker Setting
(Quick)
(DV-5900M
only)
Speaker Setting
(Custom)
(DV-5900M
only)
Table : SET UP MENU “SOUND” Function & Setting (1/2)
Function Item Setting Item
Bitstream signal.
48 kHz (2CH.) PCM signal.
Bitstream
Off
Bitstream signal.
off
Off
k
;
EXIT MENU
Digital Audio
Dolby Digital
Speaker Setting (Custom)
Speaker Setting (Quick)
Audio During Search
Dynamic Range Control
Audio Filter
DTS
MPEG
PCM Down Conversion
SOUND
7 On
7 Bitstream
7 Bitstream
7 Bitstream
7 On
7 Wide
7 Filter 60kHz