Kenwood DVF-J6050 - Manual (Page 43)

43
Chapter 4: OSD Operation
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Chapter 5
Chapter 6
Chapter 7
Chapter 8
4-4 "SOUND" OSD Operation
This section describes the items which can be controlled
with the "SOUND" OSD. (Some items may be
uncontrollable depending on the played disc and player
status.)
SOUND O f f O f f E N G 5 . 1 c h
1 D o l b y
O f f
EXIT
1 2 3 4
1 Audio icon: Shows the audio signal, audio language
and audio language No., number of audio channels.
Select to switch the audio language.
2 Virtual Surround icon: Shows the level of the Vir-
tual Surround effect. Select to adjust the level of Vir-
tual Surround or switch it off.
3 Cinema voice icon: Shows the on/off status of Cin-
ema Voice. Select to switch Cinema Voice on or off.
r
4 Down Mix icon (DV-5900M only): Shows the on/
off status of Down mix. Select to switch Down Mix
on or off.
r
4-4-1 Switching the audio language
When a VCD or a DVD containing the recording of audio
in multiple languages is played, the language used in the
voice can be switched over. (The audio language can also
be switched directly by pressing the AUDIO button.)
Operation procedure
1. Press the ON SCREEN button during DVD playback
and select the "SOUND" OSD by pressing the cursor
up/down button.
2. Move the cursor to
E N G 5 . 1 c h
1 D o l b y (Audio icon) by
pressing the cursor left/right button, then press the
ENTER button.
3. Select the desired audio language number by pressing
the cursor up/down button, then press the ENTER
button.
÷ With a DVD AUDIO disc, an audio language
number can be selected.
5.1ch 96k 24b
1 P. P C M (DV-5900M only)
÷ With a DVD VIDEO disc, an audio language
number can be selected from up to 8 numbers.
÷ With VCD, "Stereo", "L", "R" or "L+R" can be
selected.
÷ The default audio language set by the user is
selected when the power is turned on or the disc is
changed. If the default language is not contained
in the disc, the priority language defined for the
disc will be played back.
4-4-2 Virtual Surround function
When playing a DVD recorded with Dolby Digital
Surround audio, powerful sound can be reproduced even
when you use only two speakers.
Operation procedure
1. Press the ON SCREEN button during DVD playback,
and select the "SOUND" OSD by pressing the cursor
up/down button.
2. Move the cursor to
O f f
(Virtual Surround icon)
by pressing the cursor left/right button, then press
the ENTER button.
÷ The icon can be selected only when the played
software is recorded in Dolby Digital audio (with
2 or more channels).
3. Select the level of Virtual Surround effect by pressing
the cursor up/down button, then press the ENTER
button.
DV-5900M
Off
1
2
HP1
HP2
Other
Off
1
2
The effect is increased when the
selected level is higher. Select "Off"
to switch the effect Off. To select
the level of the Virtual Surround
effect through headphones, select
"HP VSS1" or "HP VSS2".
The effect is increased when the
selected level is higher. Select "Off"
to switch the effect Off.
(DV-5900M)