Kenwood DVF-J6050 - Manual (Page 39)

39
Chapter 4: OSD Operation
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Chapter 5
Chapter 6
Chapter 7
Chapter 8
4-3-2 Selecting a group, title, folder, chapter,
track or file
Use the following procedure to select a new group, title,
folder, chapter, track or file to be played using OSD. (They
can also be selected directly by pressing the numeric
buttons or a
4, ¢ button. ⁄)
When performing this operation with a P.B.C.-
compatible VCD, set P.B.C. to off.
‹
Operation procedure
1. Press the ON SCREEN button during playback to
display the "MAIN" OSD.
2. Move the cursor to the "Group", "Track", "Title",
"Chapter", "Folder" or "File" icon by pressing the
cursor left/right button, then press the ENTER button.
DVD AUDIO (DV-5900M only) :
Select Group
3
or Track
3
DVD VIDEO: Select Title
3
or Chapter
3
CD, VCD : Select Track
3
MP3 : Select Folder
3
or File
3
The cursor is displayed on the currently selected disc
number.
4-3 "MAIN" OSD Operation
This section describes the display contents and
controllable items of the "MAIN" OSD. (Note that
certain items may not be controllable depending on the
played disc and player status.)
2 8 - : 4 0 P l a y S e t O f f M A I N
T O TA L Disc
5
Title
3
Chapter
3
EXIT
2 1 3 4 5
1
Disc icon: Shows the disc number. Select to change
the disc.
2
Group icon: Shows the group number in DVD AU-
DIO disc.
(DV-5900M only)
Track icon: Shows the track number in DVD AU-
DIO, VCD or CD disc.
Title icon: Shows the title number in DVD VIDEO
disc.
Chapter icon: Shows the chapter number in DVD
VIDEO disc.
Folder icon: Shows the folder number in MP3 file.
File icon: Shows the file number in MP3 file.
Select an icon to change its content.
3
Time display icon: Shows the disc time. Select to
perform time search or change the time display.
‚
4
Memory Play/Memory Set icon: Select to register
or recall memory.
‚
5
Repeat icon: Shows the repeat mode. Select to use
repeat play mode.
q
4-3-1 Selecting the disc to be played
Use the following procedure to select a new disc to be
played using OSD.
÷ Rotate the DISC knob on the front panel to select
the disc number. The disc number can also be
selected using the DISC SEL. and numeric buttons
on the remote.
Operation procedure
1. Press the ON SCREEN button to display the "MAIN"
OSD.
2. Move the cursor to the Disc
5
(Disc icon) by pressing
the cursor left/right button, then press the ENTER
button.
÷ This operation is not available in the all random
and program mode.
3. Select the disc number (1~400, PLUS1~3) by pressing
the cursor up/down button, then press the ENTER
button to start playback.
1
2
3
4
5
÷ The disc number can be selected directly by using
the numeric buttons.
(DV-5900M)