LogTag Recorders LogTag Analyzer Temperature Recorder - Manual (Page 21)

Chapter 3 Quick Start Guide 21
Once the software has finished uploading the updated configuration information into each
LogTag, the window displaying the progress will look similar to the following picture.
In this screen you will see one of the following pictures next to each of the items in the
list:
 (no picture) indicates the LogTag is still in the process of being prepared for its next
use.
 The LogTag was successfully prepared for its next use.
 The LogTag failed to be prepared for next use. Press to try again.
 The battery within the LogTag is low and is unlikely to have enough capacity to
record all the data you want during its next use. In this situation the LogTag should no
longer be used.
When all LogTags have finished receiving their new configuration data, click
to close the wizard. Your LogTag(s) are now ready to be started and used.
Please note that the automatic download feature is disabled in this screen. If you use the
button to configure a different LogTag, you may update the configuration of
a LogTag with unsaved data.