LogTag Recorders LogTag Analyzer Temperature Recorder User Manual
Page 54
54
LogTag Analyzer User Guide (2.0)
Data
A listing (spreadsheet style) of the time versus humidity and/or
temperature data.
Summary
A summary of the data, including averages, ranges, alert results,
LogTag identification data, and other information.
Pre-Start Chart
A chart of data stored by the LogTag prior to it being started.
Pre-Start Data
A listing of the data stored by the LogTag prior it being started.
Pre-Start Summary
A summary of the data stored by the LogTag prior to it being started.
All Chart
A chart of the all of the data stored in the LogTag including the data
prior to it being started and after being started.
All Data
A listing of the all of the data stored in the LogTag including the data
prior to it being started and after being started.
All Summary
A summary of all of the data stored in the LogTag including the data
prior to it being started and after being started.
Day Summary
A summary of the day statistics for display loggers.
The screens that are typically used are the first three (Chart, Data and Summary), since
they represent the normal usage of the LogTag. The other Data Screens are included to
deal with situations where the LogTag may have not been activated due to user error; the
data is still collected and available. LogTags may be handled by those who are unfamiliar
with the start feature. The “
pre-start logging
on page 42” feature protects against
accidental “no starts” to preserve data that may be valuable.
In some cases, not all the "tabs" previously described will be displayed, for example you
may only see Chart, Data and Summary. If the LogTag has been configured to not record
any pre-start data, the downloaded data will not display any; you will only see the data
that has been set up in the “configured mode” and recorded after starting the LogTag.
Pre-start recording is an option, not a default. Also if the LogTag was configured to record
continuously and the data has wrapped in memory all the pre-start data would have been
replaced with more recent data and as such there will be no pre-start data left to display.