LogTag Recorders LogTag Analyzer Temperature Recorder - Manual (Page 98)

98 LogTag Analyzer User Guide (2.0)
Advanced settings Press this button to display a new dialogue
window where you can enter advanced
SMTP settings like port numbers, retries
and log files. Refer to the section about
Advanced SMTP settings (on page 99).
Attach file in the
following formats
Select all files that you wish to attach when
the e-mail is sent. Each file ticked here will
be created, regardless of the settings
made in "EDIT - OPTIONS - EXPORTS AND
REPORTS".
As a minimum you only need to provide an SMTP server address and one recipient e-mail
address for this function to work.
Every time you make changes to these settings you should perform a test by pressing the
"Send Test e-mail" button. LogTag Analyzer will
 check you have provided valid connection data,
 send a test e-mail to the e-mail addresses in the recipient list.
If any of these actions fail, LogTag Analyzer will display one of the following error
messages:
In this case the SMTP server requires authentication, and the data provided were not
correct. Please enter the correct authentication data.