LogTag Recorders LogTag Analyzer Temperature Recorder - Manual (Page 58)

58 LogTag Analyzer User Guide (2.0)
Inspection marks are recorded each time the START MARK button is pressed on the
LogTag. Each inspection mark is numbered and can be identified by counting the number
of marks on the Chart display. If you click on the corresponding Summary tab and scroll
down in the data record you will see a summary of all the points that were recorded
between each subsequent inspection mark. Following is a picture of a portion of a
Summary Screen showing the relevant information for the sequence of data points
between the inspection mark #2 and inspection mark #3.
Manual scaling of the chart
To change the temperature and humidity scale, or select a range of readings by time and
date, select “Manual Scaling” from the chart popup context menu.
The following dialog will be displayed: