LogTag Recorders LogTag Analyzer Temperature Recorder - Manual (Page 102)

102 LogTag Analyzer User Guide (2.0)
Advanced settings Press this button to display a new dialogue
window where you can enter advanced
FTP settings like port numbers, retries and
log files. Refer to the section about
Advanced FTP settings (on page 103).
All of the above settings are required to make a successful connection to an FTP server.
Every time you make changes to these settings you should perform a test by pressing the
"Test connection" button. LogTag Analyzer will
 check you have provided valid connection data,
 if necessary create the folder you have specified and
 put a small test file in the selected location.
If any of these actions fail, LogTag Analyzer will display one of the following error
messages:
In this case the remote folder could not be created. Please select a different folder name
or change to a permitted location.