LogTag Recorders LogTag Analyzer Temperature Recorder - Manual (Page 51)

Chapter 5 Results from LogTag 51
The chart of this file, which contains pre-start readings, has been zoomed to show only a
small proportion of the readings:
The window slider shows there are still readings earlier and later than the displayed data.
When saved as a *.sltd file, it will be automatically re-opened and now only displays the
previously zoomed readings:
Note: Those readings which are no longer displayed are still present in the file. Any *.sltd
file can be saved as a *.ltd file, and when re-opened, all readings taken by the recorder
during this trip will become available for viewing.
This can also be achieved by simply re-naming the file from *.sltd to *.ltd.
Files with a *.sltd extension cannot be read by versions of LogTag Analyzer earlier than
2.0, they can however be read once renamed to *.ltd.
*.sltd files can also be opened directly from e-mail attachments or by double clicking the
file in Windows Explorer, as the installer forLogTag Analyzer registers this file extension
and associates it with LogTag Analyzer.