LogTag Recorders LogTag Analyzer Temperature Recorder User Manual
Page 57
Chapter 5 Results from LogTag
57
Whenever the data displayed on the chart has been zoomed in to show more detail and is
showing only a portion of the charted data, if you click on the corresponding Data tab you
will see that only the readings shown on the chart are currently displayed. If you also click
on the corresponding Summary tab you will see an additional section of statistics that
have been calculated based on only the portion of readings currently being shown on the
Chart screen. Following is an example of the additional section of statistics that will
appear within the Summary Screen when a section of the readings within the Chart
screen have been zoomed in.
If there are readings beyond the limits of the sensor within the time interval that is being
displayed, the statistics for this interval will be displayed as "**".
The Zoom Out (
) command in the
Edit menu
(on page 122) or on the
toolbar
(see
"Toolbar commands" on page 126) can be used to revert the display back to showing the
range of data points that were showing prior to the new zoom section being selected.