LogTag Recorders LogTag Analyzer Temperature Recorder - Manual (Page 66)

66 LogTag Analyzer User Guide (2.0)
1. Move the mouse pointer over the chart until the appropriate tooltip is displayed.
Right-click, then select the "Shift Chart" command from the popup context menu. This will
cause the following dialog to be displayed, where the new start time and date can be
entered, or the chart can be revert to its original date/time by selecting the "Original start
time" button. Click the OK button to display the change.
2. Press and hold the CTRL key, left-click on the chart you would like to move, and drag
the chart to new the position.
An additional time axis is displayed for each shifted chart indicating the corresponding
time in relation to the original start time.
Note: Shifting a chart will not change any of the original recorded data, only the location
the data is displayed in relation to other charts within the Multi Chart display will change.