Liebert UPS System - Manual (Page 55)

Chapter 5 Operation of Display Panel
49
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
*------------------------------------------------------------------*
*----------------Emerson Network Power-----------------*
*------------------------------------------------------------------*
* UPS version£ º 1.00 *
* UPS model£ º itrust0400L - *
* UPS type£ º Single normal *
* UPS ID£ º NO.3 *
* Rectifier version£ º 1.00 *
* Inverter version£ º 1.00 *
* Monitor version £ º 1.00 *
* Record start time£ º 05-11-02 12: 23: 12 *
*----------------Press any key to continue----------------*
*------------------------------------------------------------------*
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
Fig. 5-7 Display Menu
5.2.4 Menu Keys Display Window
The window is displayed in Figure 5-6. Use the arrow-up and arrow-down keys to
select from the menu and the measured information will be displayed.
For example, if the user the first menu (main rectifier input) then the measuring
window will display the input line-line voltage and the current.
2001-11-08 UL33-0400L 12:30:20
Inv. On Units: ID 1
Vphase
Iphase A
Freq.Hz
A(B) B(C) C(A)
221
11.8 12.3 12.5
50.2 50.1 50.1
0.99 0.99 0.99
Input Breaker Close 11£ -08 12:09
Output Breaker Open
UPS in Normal Mode
Batt. Boost Charging
11£ -08 12:09
11£ -08 12:09
11£ -08 12:09
11£ -08 12:09
Mains
Bypass
Output
Local
System
Battery
P.F.
220 221
Byp. Breaker Close
Fig. 5-8 Press Up(F2) or Down (F3) to Move the Cursor
Scroll Up and down the window by pressing the F1 key.
If the selected menu is not a historical record, then pressing F1 will display current
events and alarms.