Lexmark 7500 Series - Manual (Page 126)

Using the Change Printer Default Settings submenu
1 From the Setup menu, press or repeatedly until Change Printer Default Settings is highlighted.
2 Press .
3 After changing values, press to save the values as default settings and exit this submenu.
Use this To
Set Time Set the current time using the keypad numbers.
Set Date Set the current date using the keypad numbers.
Paper Handling Specify the size and type of paper loaded. For more information, see “Using
the Paper Handling submenu” on page 125.
Language Change the language shown on the control panel.
Country Change the country or region shown on the control panel to your country or
region.
Key Press Tone Set the volume of the tone when a control panel button is pressed to either On
or Off. On is the default.
Power Save Set the printer to enter a power saving mode at or after a certain time limit.
Block Host Settings Allow your system support person to block to prevent individual users on a
network from making printer setting changes using the Printer Setup Utility.
Speaker Volume Set the volume of the speaker during a call.
Using the Change Copy Default Settings submenu
1 From the Setup menu, press or repeatedly until Change Copy Default Setting is highlighted.
2 Press .
3 After changing values, press to save these values and exit this submenu.
Use this To
Color Specify to print in color or black and white.
Quality Specify print quality.
Note: Auto and Photo are good for pictures and paper-based print jobs. Auto
is good for printing on transparencies.
Content Type Specify the type of document you want to print.
2-Sided Original Specify if you want to copy a two-sided original.
Paper Handling Specify the size and type of paper loaded. For more information, see “Using
the Paper Handling submenu” on page 125.
Using the Change Photo Default Settings submenu
1 From the Setup menu, press or repeatedly until Change Photo Default Settings is highlighted.
2 Press .
Understanding the printer
126