Lexmark 7500 Series - Manual (Page 130)

Using the Change PictBridge Default Settings submenu
Use these menu items to select print settings for PictBridge printing if no camera selections for the settings are
received by the printer.
1 Press or to enter this submenu.
2 After changing values, press to save these values and exit this submenu.
Use this To
Photo Size Specify the size of the photo to be printed.
Layout Specify a layout for the photos.
Quality Specify to print in Auto, Draft, Normal or Photo mode.
Paper Handling Specify the size and type of paper loaded. For more
information, see “Using the Paper Handling submenu”
on page 125.
Printing the Fax Settings List
1 From the Setup menu, press or repeatedly until Print Fax Settings List is highlighted.
2 Press .
3 Press to print a user default settings list which lists each fax setting in the printer, the value it is set to, and its
factory default.
Using the Network Setup submenu
The Network Setup submenu is listed only if an internal wireless print server is installed in the printer.
1 From the Setup menu, press or repeatedly until Network Setup is highlighted.
2 Press .
3 After changing values, press to save these values and exit this submenu.
Use this To
Reset Network Adapter Defaults Reset all wireless network settings.
Print Network Setup Page Print a list of network functions.
Wireless Menu Access the Wireless Setup Menu.
TCP/IP Set the network option to TCP/IP (Transmission Control
Protocol/Internet Protocol).
Network Time Menu Set Time Server to either the Enable or Disable value.
Understanding the printer
130