Scanning multiple pages using the scanner glass – Lexmark 7500 Series User Manual
Page 53
9
Press to preview the copy.
10
Press
to continue adjusting the settings.
11
Repeat step 9 to step 10 as needed.
12
Press .
13
Follow the instructions on your computer screen.
Related topics:
•
“Loading original documents on the scanner glass” on page 34
•
“Using the control panel” on page 113
Scanning multiple pages using the scanner glass
1
Load an original document facedown on the scanner glass.
2
From the Finder desktop, double-click the Lexmark 7500 Series folder.
3
Double-click the Lexmark 7500 Series Center icon.
4
Select Prompt for multiple pages.
5
Click Scan.
6
In the Save dialog, enter a file name for your scan job.
7
From the Where pop-up menu, choose a destination for the scanned items.
8
From the “Format for” pop-up menu, choose a file type.
9
Click Save.
10
When prompted, place the next item on the scanner glass, and then click Scan on the dialog. Continue this for
every page you want to scan.
11
Click Done when you are finished scanning all items.
Notes:
•
You can also select Prompt to name each page if you want to save each scanned item under a different file
name. Otherwise, scanned items will be given the file name you specified and numbered accordingly.
•
When a scan job is saved as a PDF, the Save dialog will only prompt once. All scanned pages are saved to only
one file since PDF supports multiple-page scanning.
Scanning
53