Lexmark 7500 Series - Manual (Page 19)

Loading envelopes
You can load up to 10 envelopes at a time.
Warning: Do not use envelopes that have metal clasps, string ties, or metal folding bars.
1 Load envelopes in the center of the paper support with the stamp location in the upper left corner.
2 Make sure:
• The print side of the envelopes faces you.
• The envelopes are designed for use with inkjet printers.
• The paper guides rest against the edges of the envelopes.
Notes:
• Do not load envelopes with holes, perforations, cutouts, or deep embossing.
• Do not use envelopes that have exposed flap adhesive.
• Envelopes require more drying time. Remove each envelope as it exits, and allow it to dry to avoid ink
smudging.
Related topics:
• “Printing envelopes” on page 26
Loading labels
You can load up to 25 sheets of labels at a time.
1 Load labels with the print side facing you and the top of the sheet fed into the printer first.
2 Make sure:
• The print side of the labels faces you.
• The top of the labels feeds into the printer first.
• The adhesive on the labels does not extend to within 1 mm of the edge of the labels.
• You use full label sheets. Partial sheets (with areas exposed by missing labels) may cause labels to peel
off during printing, resulting in a paper jam.
• The labels are loaded in the center of the paper support.
• The paper guides rest against the edges of the labels.
Note: Labels require more drying time. Remove each sheet of labels as it exits, and allow it to dry to avoid ink
smudging.
Printing
19