Sending a fax using the control panel, Sending a broadcast fax at a scheduled time – Lexmark 7500 Series User Manual

Page 76

Advertising
background image

Sending a fax using the control panel

1

Make sure the printer is on and is connected to a working phone line.

2

Load an original document faceup into the Automatic Document Feeder (ADF) or facedown on the scanner
glass.

Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the Automatic Document Feeder (ADF). Place these items on the scanner glass.

3

From the control panel, press

or

repeatedly until Fax is highlighted.

4

Press .

The Fax Mode menu appears.

5

Enter a fax number. For more information on the methods you can use to enter a fax number, see the table that
begins with step 4 on page 74.

Notes:

You can include a calling card number as part of the fax number.

A fax number can include up to 64 numbers, commas, periods, and/or the symbols * or #.

6

Press to start the fax job.

Note: If you are scanning individual pages using the scanner glass, after each page is scanned, the message
Would you like to include another page in the fax?

appears to prompt you either to scan another

page or to send the fax right away.

7

If you want to send a fax to a group of numbers (broadcast fax), enter the fax numbers using any combination
of the methods listed in the table that begins with step 4, until a maximum of 30 fax numbers have been entered.

Related topics:

“Entering a fax number” on page 74

Sending a broadcast fax at a scheduled time

You can send a fax to a combination of up to 30 people or groups at a time you choose.

1

Make sure the printer is connected to a working phone line.

2

Load an original document faceup into the Automatic Document Feeder (ADF) or facedown on the scanner
glass.

Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the Automatic Document Feeder. Place these items on the scanner glass.

3

From the control panel, press

or

repeatedly until Fax is highlighted.

4

Press .

The Fax Mode menu appears.

5

Enter a fax number. For more information on the methods you can use to enter a fax number, see the table that
begins with step 4 on page 74.

Notes:

Group Dial is not supported with broadcast fax.

You can include a calling card number as part of the fax number.

A fax number can include up to 64 numbers, commas, periods, and/or the symbol: * or #.

Faxing

76

Advertising