Lexmark 7500 Series - Manual (Page 141)

To adjust the settings of the Network Card Reader:
1 Choose Lexmark Network Card Reader ΠPreferences.
2 If necessary, click General.
3 Choose whether to show a notification dialog when a memory device is inserted into the printer.
4 Click Settings.
5 Assign a name to your computer.
6 Choose whether to specify a PIN to be able to access your computer.
Note: The PIN should be a combination of four digits from 1–9.
7 Click Apply.
These buttons are at the bottom of the Network Card Reader dialog:
Click To
+ Add a network printer to the list.
– Remove a network printer from the list.
Connect to a network printer on the list.
Disconnect from a network printer on the list.
Adjust the size of the thumbnail(s) on the Network Card Reader dialog.
Go to the Help Center to find more information.
Save Save the selected images on your computer.
Related topics:
• “Transferring photos from a memory device to the computer using the control panel” on page 98
• “Transferring photos from a memory device to the computer over a wireless network” on page 106
Understanding the printer
141