Lexmark 7500 Series - Manual (Page 163)

Remove and reinstall the internal print server
1 Turn off your printer, and then unplug the power cord from the wall outlet.
Warning: Failure to unplug the printer can cause damage to your printer and to the internal wireless print server.
Make sure the printer is turned off and the power cord is unplugged from the wall outlet before you proceed.
2 While holding the printer firmly with one hand, hold the internal print server with your other hand and then pull
it away from the printer.
3 Reinstall the internal print server.
Warning: Wireless print servers are easily damaged by static electricity. Touch something metal such as the
printer frame before you touch the wireless print server.
Wireless printer is no longer working
These are possible solutions. Try one or more of the following:
Check power
• Make sure the printer power light is on. For more information, see “Power button is not lit” in the “Troubleshooting”
chapter.
• Make sure the wireless access point (wireless router) is on.
Troubleshooting
163