Printing a banner – Lexmark 7500 Series User Manual
Page 28
Note: To prevent smudging, remove each transparency as it exits, and let it dry before stacking. Transparencies
may require up to 15 minutes to dry.
Related topics:
•
“Loading transparencies” on page 20
Printing a banner
1
Remove all paper from the paper support.
2
Tear off only the number of pages needed for the banner (up to 20 sheets).
3
Place the required stack of banner paper on the top cover.
4
Load only the first page of banner paper into the paper support with the leading edge of the banner going into
the printer.
5
Adjust the left and right paper guides.
6
Customize the settings in the Page Setup dialog.
a
With your document open, choose File
Page Setup.
b
From the Settings pop-up menu, choose Page Attributes.
c
From the “Format for” pop-up menu, choose the printer.
d
From the Paper Size pop-up menu, choose A4 Banner or US Letter Banner.
e
Select an orientation.
f
Click OK.
7
Customize the settings in the Print dialog.
a
With your document open, choose File
Print.
b
From the Printer pop-up menu, choose the printer.
c
From the third pop-up menu from the top, choose Quality & Media.
•
From the Paper Type pop-up menu, choose Plain.
•
Select a print quality.
Note: Higher print quality settings result in better quality documents but may take longer to print.
d
Click OK.
Related topics:
•
“Using the Print dialog” on page 134
•
“Loading banner paper” on page 21
Printing
28