Lexmark 7500 Series - Manual (Page 66)

Note: In Germany (and some other countries), the printer ships with a special RJ-11 plug in the EXT port. Do not
remove the RJ-11 plug. It is required for both the fax and telephone to work properly.
1 Make sure you have a telephone cord (provided with the product) and a telephone wall jack.
2 Connect one end of the telephone cord into the LINE port of the printer.
3 Connect the other end of the telephone cord into the N slot of an active telephone wall jack.
4 If you would like to use the same line for both fax and telephone communication, connect a second telephone
line (not provided) between the telephone and the F slot of an active telephone wall jack.
5 If you would like to use the same line for recording messages on your answering machine, connect a second
telephone line (not provided) between the answering machine and the other N slot of the telephone wall jack.
Faxing
66