Panasonic DMC FZ 28 - Manual (Page 112)

VQT1S36 112
Connecting to other equipment
Connecting to other equipment
Connecting to a PC
You can acquire recorded pictures to a PC by connecting the camera and the PC.
• You can easily print out or mail the pictures you have imported. Use of the
“ PHOTOfunSTUDIO-viewer- ” bundled software on the CD-ROM (supplied) is a convenient
way of doing this.
• Read the separate operating instructions for the supplied software for more information about
the software in the CD-ROM (supplied) and how to install it.
Preparations:
Turn on the camera and the PC.
Remove the card before using the pictures in the built-in memory.
Connect the camera to a PC via the USB connection cable A
(supplied).
• Do not use any other USB connection cables except the supplied one. Use of
cables other than the supplied USB connection cable may cause malfunction.
Press 3/4 to select [PC], and then press [MENU/
SET].
• If [USB MODE] (P28) is set to [PC] in the [SETUP] menu in
advance, the camera will be automatically connected to the PC
without displaying the [USB MODE] selection screen. Since
there is no need to set this each time you connect to the PC, it is
convenient.
A USB connection cable (supplied)
• Check the directions of the connectors, and plug them straight in or unplug them straight out.
(Otherwise the connectors may be bent out of shape which will cause trouble.)
B Align the marks, and insert.
C AC adaptor (DMW-AC7PP; optional)
• Use a battery with sufficient battery power or the AC adaptor (DMW-AC7PP; optional). If the
remaining battery power becomes low during USB connection, the alarm beeps. Refer to
“ Disconnecting the USB connection cable safely ” (P113) before disconnecting the USB
connection cable. Otherwise, data may be destroyed.



USB MODE
SELECT SET
PLEASE SELECT
THE USB MODE
PictBridge(PTP)
PC
MENU
DMC-FZ28P_PC.book 112 ページ ２００８年７月２日 水曜日 午後１１時１４分