Panasonic DMC FZ 28 - Manual (Page 134)

VQT1S36 134
Others
∫ Functions that cannot be used when the component cable is connected
[LCD MODE]/[HISTOGRAM]/[TITLE EDIT]/[TEXT STAMP]/[RESIZE]/[TRIMMING]/
[LEVELING][ASPECT CONV.]/[AUDIO DUB.]/[COPY]/[MULTI] settings of [DPOF PRINT]/
[MULTI] settings of [PROTECT]/[DELETE MULTI]/Creation of still pictures from motion pictures
Troubleshooting
First, try out the following procedures ( P134 – 141 ).
• The battery is not inserted correctly. (P17)
• The battery is exhausted.
• Charge the battery.
• Is the display set to Viewfinder?
> Press [EVF/LCD] to switch to the LCD monitor.
• Is [AUTO LCD OFF] (P26) of the [ECONOMY] mode active?
> Press the shutter button halfway to cancel these modes.
• The battery is exhausted.
• Charge the battery.
• The battery is exhausted.
• Charge the battery.
• If you leave the camera on, the battery will be exhausted.
> Turn the camera off frequently by using the [ECONOMY] mode etc. (P26)
• Is the temperature of the battery excessively high or low? If it is, it will take longer than usual to
charge the battery or charging may remain incomplete.
• Are the terminals of the charger or battery dirty?
> Wipe off the dirt using a dry cloth.
[AUDIO DUB.] (P110) • Motion pictures
• [FLIP ANIM.]
• Protected pictures
• When set to [RAW] or [RAW iJPEG]
If the problem is not resolved, it may be improved by selecting [RESET] (P27) on the
[SETUP] menu when taking pictures.
Battery and power source
The camera cannot be operated even when it is turned on.
The LCD monitor turns off while the camera is turned on.
The camera turns off immediately after it is turned on.
The [CHARGE] lamp flashes.
DMC-FZ28P_PC.book 134 ページ ２００８年７月２日 水曜日 午後１１時１４分