Panasonic DMC FZ 28 User Manual
Page 27
27
VQT1S36
Preparation
•
Refer to
P45
for details.
•
The auto review function is activated regardless of its setting when using auto bracket
(P54)
/
color bracket
(P54)
, [HI-SPEED BURST]
(P69)
and [FLASH BURST]
(P70)
in scene mode,
burst mode
(P55)
and when recording still pictures with audio
(P91)
. (The pictures cannot be
enlarged.)
•
In Intelligent auto mode, the auto review function is fixed to [2SEC.].
•
If [HIGHLIGHT]
(P26)
is set to [ON], white saturated areas appear blinking in black and white
when the auto review function is activated.
•
Focus position will not be recorded.
•
The folder number is updated and the file number starts from 0001.
(P113)
•
A folder number between 100 and 999 can be assigned.
When the folder number reaches 999, the number cannot be reset. We recommend formatting
the card
(P29)
after saving the data on a PC or elsewhere.
•
To reset the folder number to 100, format the built-in memory or the card first and then use this
function to reset the file number.
A reset screen for the folder number will then appear. Select [YES] to reset the folder number.
•
When the [RESET] setting is selected during recording, the operation that resets the lens is
also performed at the same time. You will hear the sound of the lens operating but this is
normal and not indicative of malfunctioning.
•
When [SETUP] menu settings are reset, the following settings are also reset. In addition,
[FAVORITE]
(P107)
in [PLAYBACK] mode menu is set to [OFF], and [ROTATE DISP.]
(P106)
is
set to [ON].
–
[ZOOM RESUME]
[PLAY ON LCD]
If you selected the Viewfinder in a recording mode, the display will
automatically switch to the LCD monitor when reviewing or
playing back the pictures.
[OFF]/[ON]
o
[AUTO REVIEW]
Set the length of time that the picture is displayed after taking it.
[OFF]
[1SEC.]
[2SEC.]
[HOLD]:
The pictures are displayed until one any of the buttons
is pressed.
[ZOOM]: The picture is displayed for 1 second and then
enlarged 4k and displayed for 1 more second.
[ZOOM RESUME]
Record the zoom position when the camera is turned off.
[OFF]
[ON]
It will automatically return to the zoom position when the power
was switched [OFF], next time you turn the power [ON].
v
[NO.RESET]
Reset the file number of the next recording to 0001.
w
[RESET]
The [REC] or [SETUP] menu settings are reset to the initial
settings.
DMC-FZ28-Body1_mst.fm 27 ページ ２００８年７月３日 木曜日 午後３時３２分