Panasonic DMC FZ 28 User Manual
Page 68
VQT1S36
68
Advanced (Recording pictures)
This takes pictures of a baby with a healthy complexion. When you use the flash, the light
from it is weaker than usual.
It is possible to set different birthdays and names for [BABY1] and [BABY2]. You can
select to have these appear at the time of playback, or have them stamped on the
recorded image using [TEXT STAMP]
(P101)
.
∫ Birthday/Name setting
1
Press 3/4 to select [AGE] or [NAME] and then press 1.
2
Press 3/4 to select [SET] and then press [MENU/SET].
3
Enter the birthday or name.
Birthday:
2/1: Select the items (year/month/day).
3/4: Setting.
[MENU/SET]: Exit.
Name: For details on how to enter characters, read the [TITLE EDIT] section on
P100
.
•
When the birthday or name is set, [AGE] or [NAME] is automatically set to [ON].
•
If [ON] is selected when the birthday or name has not been registered, the setting screen
appears automatically.
4
Press [MENU/SET] to finish.
∫ To cancel [AGE] and [NAME]
Select the [OFF] setting in step
2
of the “Birthday/Name setting” procedure.
Note
•
The age and name can be printed out using the “PHOTOfunSTUDIO-viewer-” bundled software
on the CD-ROM (supplied).
•
If [AGE] or [NAME] is set to [OFF] even when the birthday or name has been set, the age or
name will not be displayed. Before taking pictures, set [AGE] or [NAME] to [ON].
•
The focus range is 1 cm (0.04 feet) (Wide)/2 m (6.57 feet) (Tele) to ¶.
•
[INTELLIGENT ISO] is activated, and maximum ISO sensitivity level becomes [ISO400].
•
If the camera is turned on with [BABY1]/[BABY2] set, the age and name are displayed at the
lower left of the screen for about 5 seconds, along with the current date and time.
•
If the age is not properly displayed, check the clock and birthday settings.
•
If the quality is set to [
] or [
] and pictures are taken, the name is not registered on the
pictures.
•
The birthday setting and name setting can be reset with [RESET].
•
The initial setting for [AF MODE] is [š].
Select this when you want to take pictures of a pet such as a dog or a cat.
You can set your pet’s birthday and name. You can select to have these appear at the time
of playback, or have them stamped on the recorded image using [TEXT STAMP]
(P101)
.
For information about [AGE] or [NAME], refer to [BABY1]/[BABY2] on
P68
.
Note
•
The initial setting for the AF assist lamp is [OFF].
•
The focus range is 1 cm (0.04 feet) (Wide)/2 m (6.57 feet) (Tele) to ¶.
•
[INTELLIGENT ISO] is activated, and maximum ISO sensitivity level becomes [ISO800].
•
The initial setting for [AF MODE] is [
].
•
Refer to [BABY1]/[BABY2] for other information about this mode.
:
[BABY1]/; [BABY2]
í
[PET]
DMC-FZ28P_PC.book 68 ページ ２００８年７月３日 木曜日 午後１２時１２分