Panasonic DMC FZ 28 - Manual (Page 55)

55 VQT1S36
Advanced (Recording pictures)
Press [MENU/SET] to close the menu.
• You can also press the shutter button halfway to finish.
Note
• When setting exposure bracket, [ ] appears on the screen.
• When setting color bracket, [ ] appears on the screen.
• When taking pictures using auto bracket after setting the exposure compensation range, the
pictures taken are based on the selected exposure compensation range.
When the exposure is compensated, the exposure compensation value appears on the lower
left of the screen.
• The exposure may not be compensated with auto bracket depending on the brightness of the
subject.
• The auto bracket/color bracket setting is canceled if you turn the camera off or [POWER SAVE]
is activated.
• When auto bracket/color bracket is set, the auto review function is activated regardless of the
auto review setting. (The picture is not enlarged.) You cannot set the auto review function in the
[SETUP] menu.
• In shutter-priority AE and manual exposure, if the shutter speed is set to more than 1 second,
auto bracket is canceled.
• [Œ] is set for the flash when auto bracket/color bracket is set.
• Burst is canceled when auto bracket/color bracket is set.
• The one set last will take precedence. (auto bracket and color bracket cannot be set
simultaneously.)
[REC] mode:
Taking Pictures using Burst Mode
Pictures are taken continuously while the shutter button is pressed.
Select the ones you really like from among the pictures you have taken.
Press [ ˜/‚ ] to display the burst mode selection
menu, and then press
3/4 to select the burst
mode.
A [˜/‚]button
Press [MENU/SET].
• You can also press the shutter button halfway to finish.
• The menu screen disappears after about 5 seconds. At this time,
the selected item is automatically set.
Take a picture.
• Hold down the shutter button fully to activate the burst mode.
A
DMC-FZ28P_PC.book 55 ページ ２００８年７月２日 水曜日 午後１１時１４分