Panasonic DMC FZ 28 User Manual
Page 29
29
VQT1S36
Preparation
•
Use a battery with sufficient battery power or the AC adaptor (DMW-AC7PP; optional) when
formatting. Do not turn the camera off during formatting.
•
If a card has been inserted, only the card is formatted. To format the built-in memory, remove
the card.
•
If the card has been formatted on a PC or other equipment, format it on the camera again.
•
It may take longer to format the built-in memory than the card.
•
If the built-in memory or the card cannot be formatted, consult your nearest Service Center.
•
If you set a different language by mistake, select [~] from the menu icons to set the desired
language.
A Jitter detection demonstration
B Movement detection demonstration
•
In playback mode, [JITTER, SUBJ. MOVE DEMO.] cannot be
displayed.
•
Press [DISPLAY] to close [JITTER, SUBJ. MOVE DEMO.].
•
Press [MENU/SET] to close [AUTO DEMO].
•
[JITTER, SUBJ. MOVE DEMO.] is an approximation.
•
[AUTO DEMO] has no TV output capability.
•
You can also display [JITTER, SUBJ. MOVE DEMO.] by using the quick menu.
(P23)
[FORMAT]
The built-in memory or card is formatted.
Formatting irretrievably deletes all the data so check the data
carefully before formatting.
~ [LANGUAGE]
Set the language displayed on the screen.
[ENGLISH]/[DEUTSCH]/[FRANÇAIS]/[ESPAÑOL]/[ITALIANO]/
[繁體中文 ]
¢
/[¢]
¢Not
available on the version DMC-FZ28P sold in the U.S.
[DEMO MODE]
Select this to display [JITTER, SUBJ. MOVE DEMO.] or the
camera’s features.
[JITTER, SUBJ. MOVE DEMO.]
[AUTO DEMO]:
The camera’s features are displayed as a
slide show.
For Canadian assistance, please call:
1-800-99-LUMIX (1-800-995-8649) or
send e-mail to: [email protected]
For USA assistance, please call:
1-800-211-PANA(7262) or, contact us via the web at:
http://www.panasonic.com/contactinfo
DEMO
A
B
DMC-FZ28P_PC.book 29 ページ ２００８年７月２日 水曜日 午後１１時１４分