Panasonic DMC FZ 28 - Manual (Page 16)

VQT1S36 16
Preparation
About the Battery
(charging/number of recordable pictures)
∫ Battery indication
The battery indication is displayed on the LCD monitor/Viewfinder.
[It does not appear when you use the camera with the AC adaptor (DMW-AC7PP;
optional) connected.]
• The indication turns red and blinks if the remaining battery power is exhausted. (The power
lamp also blinks) Recharge the battery or replace it with a fully charged battery.
∫ The battery life
Recording conditions by CIPA standard
• CIPA is an abbreviation of [Camera & Imaging Products Association].
• Temperature: 23 oC (73.4 F)/Humidity: 50% when LCD monitor is on. ¢
• Using a Panasonic SD Memory Card (32 MB).
• Using the supplied battery.
• Starting recording 30 seconds after the camera is turned on. (When the optical image stabilizer
function is set to [AUTO].)
• Recording once every 30 seconds with full flash every second recording.
• Rotating the zoom lever from Tele to Wide or vice versa in every recording.
• Turning the camera off every 10 recordings and leaving it until the temperature of the battery
decreases.
¢ The number of recordable pictures decreases in Auto power LCD mode, Power LCD mode
and High angle mode
(P25) .
The number of recordable pictures varies depending on the recording interval time.
If the recording interval time becomes longer, the number of recordable pictures
decreases.
[e.g. When recording once every 2 minutes, the number of recordable pictures
decreases to about 115.]
Number of
recordable
pictures
Approx.
460 pictures
(By CIPA standard in program AE mode)
Recording time
Approx.
230 min
DMC-FZ28P_PC.book 16 ページ ２００８年７月２日 水曜日 午後１１時１４分