Panasonic DMC FZ 28 - Manual (Page 116)

VQT1S36 116
Connecting to other equipment
Select and set the items both on the screen in step 2 of the
“ Selecting a single picture and printing it ” and in step 3 of the
“ Selecting multiple pictures and printing them ” procedures.
• When you want to print pictures in a paper size or a layout which is not
supported by the camera, set [PAPER SIZE] or [PAGE LAYOUT] to [{]
and then set the paper size or the layout on the printer. (For details,
refer to the operating instructions of the printer.)
• When [DPOF PICTURE] has been selected, the [PRINT WITH DATE]
and [NUM. OF PRINTS] items are not displayed.
• If the printer does not support date printing, the date cannot be printed on the picture.
• Since the printer’s settings may take precedence over the print with date setting, check the
printer’s print with date setting as well.
Note
When asking the photo shop to print the pictures
• By stamping the date using [TEXT STAMP] (P101) or setting date printing at the time of the
[DPOF PRINT] (P108) setting before going to a photo shop, the dates can be printed at the
photo shop.
You can set the number of prints up to 999.
Press 3 to select [PRINT START] and then press
[MENU/SET].
• Refer to P116 for the items which can be set before starting to
print the pictures.
• Press [MENU/SET] to cancel printing.
• Disconnect the USB connection cable after printing.
Print Settings
[PRINT WITH DATE]
Item Description of settings
[OFF] Date is not printed.
[ON] Date is printed.
[NUM. OF PRINTS]
[PAPER SIZE]
Item Description of settings
{ Settings on the printer are prioritized.
[L/3.5 qk5q] 89 mm k127 mm
[2L/5 qk7q] 127 mm k178 mm
[POSTCARD] 100 mm k148 mm
[16:9] 101.6 mm k180.6 mm
[A4] 210 mm k297 mm
DMC-FZ28P_PC.book 116 ページ ２００８年７月２日 水曜日 午後１１時１４分