Panasonic DMC FZ 28 - Manual (Page 115)

115 VQT1S36
Connecting to other equipment
• Turn the camera off before connecting or disconnecting the AC adaptor (DMW-AC7PP;
optional).
• Before inserting or removing a card, turn the camera off, and disconnect the USB connection
cable.
• You cannot switch between the built-in memory and the card while the camera is connected to
the printer. Disconnect the USB connection cable, insert (or remove) the card and then connect
the USB connection cable to the printer again.
¢ Only when [FAVORITE] is at [ON] and when there are pictures set as favorites. (P107)
Selecting a single picture and printing it
Press 2/1 to select the picture and then press
[MENU/SET].
• The message disappears in about 2 seconds.
Press 3 to select [PRINT START] and then press
[MENU/SET].
• Refer to P116 for the items which can be set before starting to
print the pictures.
• Press [MENU/SET] to cancel printing halfway.
• Disconnect the USB connection cable after printing.
Selecting multiple pictures and printing them
Press 3.
Press 3/4 to select an item and then press [MENU/
SET].
• If the print check screen has appeared, select [YES], and print
the pictures.
Item Description of settings
[MULTI SELECT]
Multiple pictures are printed at one time.
• Press 3/4/2/1 to select the pictures, and then When [DISPLAY] is
pressed, [é] appears on the pictures to be printed. (When [DISPLAY] is
pressed again, the setting is canceled.)
• After the pictures have been selected, press [MENU/SET].
[SELECT ALL] Prints all the stored pictures.
[DPOF PICTURE] Prints the pictures set in [DPOF PRINT] only. (P108)
[FAVORITE]
¢
Prints the pictures set as favorites only. (P107)
DMC-FZ28P_PC.book 115 ページ ２００８年７月２日 水曜日 午後１１時１４分