Panasonic DMC FZ 28 - Manual (Page 40)

VQT1S36 40
Basic
Note
• The digital zoom cannot be set when õ has been selected.
• The indicated zoom magnification is an approximation.
• “EZ” is an abbreviation of “Extended optical Zoom”.
• The optical zoom is set to Wide (1 k) when the camera is turned on.
Zoom position is as when the power was turned off if the [ZOOM RESUME] (P27) is set to
[ON].
• If you use the zoom function after focusing on the subject, focus on the subject again.
• The lens barrel extends or retracts according to the zoom position. Take care not to interrupt
the motion of the lens barrel while the zoom lever is rotated.
• When you rotate the zoom lever, you may hear some sound from the camera or the camera
may shake. This is not a malfunction.
• When using the digital zoom, [STABILIZER] may not be effective.
• When using the digital zoom, we recommend using a tripod and the self-timer (P52) for taking
pictures.
[PLAYBACK] mode:
¸
Playing back Pictures
([NORMAL PLAY])
Press 2/1 to select the picture.
A File number
B Picture number
• Speed of picture forwarding/rewinding
changes depending on the playback status.
∫ Fast forwarding/Fast rewinding
Press and hold
2/1 during playback.
• The file number A and the picture number B only change one by one. Release 2/1 when the
number of the desired picture appears to play back the picture.
• If you keep pressing 2/1, the number of pictures forwarded/rewound increases.
Slide the [REC]/[PLAYBACK] selector
switch
A to [(].
• Normal playback is set automatically in the
following cases.
– When the mode was switched from the [REC]
to [PLAYBACK].
– When the camera was turned on while the
[REC]/[PLAYBACK] selector switch was at
[(].
2: Play back the previous picture
1: Play back the next picture
2: Fast rewind
1: Fast forward
A
B
DMC-FZ28P_PC.book 40 ページ ２００８年７月２日 水曜日 午後１１時１４分