Panasonic DMC FZ 28 User Manual
Page 26
VQT1S36
26
Preparation
•
If there are any white saturated areas, we recommend
compensating the exposure towards negative
(P53)
referring to the histogram
(P45)
and then taking the
picture again. It may result in a better quality picture.
•
There may be white saturated areas if the distance
between the camera and the subject is too close when
taking pictures with the flash.
If [HIGHLIGHT] is set to [ON] in this case, the area
directly illuminated by the photo flash will become white saturated and appear blinking in black
and white.
•
Refer to
P59
for details.
•
Press the shutter button halfway or turn the camera off and on to cancel [POWER SAVE].
•
[POWER SAVE] is set to [5MIN.] in the Intelligent auto mode.
•
[POWER SAVE] is fixed to [2MIN.] when [AUTO LCD OFF] is set to [15SEC.] or [30SEC.].
•
Press any button to turn on the LCD monitor again.
•
[AUTO LCD OFF] does not work while operating menu or playback zoom.
•
AV and HD output is turned off while LCD monitor is turned off.
[HIGHLIGHT]
When the auto review or the review function is activated, white
saturated areas blink in black and white.
[OFF]/[ON]
[MF ASSIST]
In manual focus, the assistance screen appears on the center of
the screen to facilitate focusing on the subject.
[OFF]:
[MF1]:
The center of the screen is enlarged.
[MF2]:
The center of the screen is enlarged over the whole screen.
q [ECONOMY]
You can conserve the battery life by setting these menus.
Also, it will turn off the LCD monitor automatically when not in use
to prevent discharge of the battery.
p [POWER SAVE]:
The camera is automatically turned off if the camera has not been
used for the time selected on the setting.
[OFF]/[2MIN.]/[5MIN.]/[10MIN.]
[AUTO LCD OFF]:
The LCD monitor is automatically turned off if the camera has not
been used for the time selected on the setting.
[OFF]/[15SEC.]/[30SEC.]
[ON]
[OFF]
DMC-FZ28P_PC.book 26 ページ ２００８年７月２日 水曜日 午後１１時１４分