Panasonic DMC FZ 28 User Manual
Page 14
VQT1S36
14
Before Use
Place the camera upside down, align
the mark on the lens hood with the
mark
A on the camera and then insert
the lens hood.
•
Check if the screw is loose and then attach the
lens hood.
Tighten the screw.
•
Do not tighten the screw too much.
∫ Removing the hood adaptor
•
Grasp the base of the hood adaptor to remove it.
Note
•
You cannot attach the lens hood the opposite way.
•
When taking pictures with flash with the lens hood attached, the lower portion of the photo may
turn dark (vignetting effect) and the control of the flash may be disabled because the photo
flash may be obscured by the lens hood. We recommend detaching the lens hood.
•
When using the AF assist lamp in the dark, detach the lens hood.
•
For details on how to attach the MC protector, ND filter and PL filter, refer to
P122
.
•
You cannot attach the conversion lens when the hood adaptor is attached.
(P120)
•
If any accessories are lost, customers in the USA should contact Panasonic’s parts department
at 1 800 833-9626 and customers in Canada should contact 1 800 99-LUMIX
(1-800-995-8649) for further information about obtaining replacement parts.
DMC-FZ28P_PC.book 14 ページ ２００８年７月２日 水曜日 午後１１時１４分