Panasonic DMC FZ 28 User Manual
Page 121
121
VQT1S36
Connecting to other equipment
¢ The actual magnification when the zoom is used will be 1.7 times the display.
Select [CONVERSION] on the [REC] menu.
(P22)
•
Refer to
P93
for [CONVERSION].
Press
3/4 to select [ ], and then press [MENU/SET] to set.
•
Set in same way to select [
] too.
•
Always set to [OFF] when the conversion lens is taken off.
Note
•
Lens adaptor (DMW-LA3; optional) is needed to use the conversion lens.
•
MC protector (DMW-LMC46; optional) or ND filters (DMW-LND46; optional) cannot be used
together with the conversion lens. Remove them before attaching the conversion lens.
•
You cannot attach a conversion lens to the hood adaptor (supplied).
•
When there is dirt (water, oil, and fingerprints, etc.) on the surface of the lens, the image may
be affected. Lightly wipe the surface of the lens with a soft, dry cloth before and after taking
pictures.
•
When using the tele conversion lens:
–
We recommend using a tripod.
–
The stabilizer function may not work sufficiently.
–
The focus indication may light due to the jitter even if the subject is not focused.
–
The time required for focusing may become longer than usual.
Zoom magnification
when a lens is
attached
(Max.
number of pixels)
Recordable range when
using a conversion lens
Wide
Tele
Tele conversion lens
9
k-18k
¢
5.5 m to
¶
Close-up
lens
Normal
3
k-18k
22 cm
(0.72feet)
to
50 cm
(1.64feet)
40 cm
(1.31feet)
to
50cm
(1.64feet)
Macro
22 cm
(0.72feet)
to
50 cm
(1.64feet)
40 cm
(1.31feet)
to
50 cm
(1.64feet)
Tele-Macro
—
33 cm
(1.08feet)
to 50 cm
(1.64feet)
C
DMC-FZ28P_PC.book 121 ページ ２００８年７月２日 水曜日 午後１１時１４分