Taking pictures with the self-timer – Panasonic DMC FZ 28 User Manual

Page 52

Advertising
background image

VQT1S36

52

Advanced (Recording pictures)

When a subject is close to the camera, the effective focus range is significantly narrowed.

Therefore, if the distance between the camera and the subject is changed after focusing on the

subject, it may become difficult to focus on it again.

AF macro mode gives priority to a subject close to the camera, so if the distance between the

camera and the subject is more than 2 m (6.57 feet), it takes longer to focus.

When you take pictures at close range, the resolution of the periphery of the picture may

decrease slightly. This is not a malfunction.

If the lens becomes dirty with fingerprints or dust, the lens may not be able to focus on the

subject correctly.

[REC] mode:

Taking Pictures with the Self-timer

Note

When using a tripod etc., setting the self-timer to 2 seconds is a convenient way to avoid the

jitter caused by pressing the shutter button.

When you press the shutter button once fully, the subject is automatically focused just before

recording. In dark places, the self-timer indicator will blink and then may turn on brightly

operating as an AF assist lamp

(P91)

to allow the camera to focus on the subject.

We recommend using a tripod when recording with the self-timer.

The number of pictures which can be taken in burst mode is fixed to 3.

The number of pictures which can be taken in [FLASH BURST]

(P70)

is fixed to 5.

Press 2 [ë].

Press 3/4 to select a mode.

You can also press 2 [ë] to select.

If you set [10S/3PICTURES], after 10 seconds the

camera takes 3 pictures at about 2 second intervals.

Press [MENU/SET].

You can also press the shutter button halfway to finish.

The menu screen disappears after about 5 seconds. At this time, the selected item is

automatically set.

Press the shutter button halfway to focus

and then press it fully to take the picture.

The self-timer indicator A blinks and the shutter is

activated after 10 seconds (or 2 seconds).

If you press [MENU/SET] while the self-timer is set, the

self-timer setting is canceled.

When [10S/3PICTURES] is selected, the self-timer

indicator blinks again after the first and the second

pictures are taken and the shutter is activated

2 seconds after it blinks.

A

DMC-FZ28P_PC.book 52 ページ 2008年7月3日 木曜日 午後12時12分

Advertising