Panasonic DMC FZ 28 User Manual
Page 50
VQT1S36
50
Advanced (Recording pictures)
•
Refer to
P58
for details about the Aperture-priority AE, Shutter-priority AE, and Manual
exposure.
•
In Intelligent auto mode, shutter speed changes depending on the identified scene.
•
In advance scene modes
(P63)
and [SCENE MODE]
(P66)
, the shutter speeds will differ from
those described above.
¢2 The shutter speed becomes a maximum of 1 second in the following cases.
–
When the optical image stabilizer is set to [OFF].
–
When the camera has determined that there is little jitter when the optical image stabilizer is
set.
¢3 The maximum shutter speed is selected when the amount of jitter is minimal while
[STABILIZER] is set or when [STABILIZER] is set to [OFF].
•
It will become 1 to 1/2000th of a second in other advanced scene modes and scene modes.
Note
•
Do not bring the flash too close to objects or close the flash while it is activated. The
objects may be discolored by its heat or lighting.
•
Do not close the flash soon after the flash is activated prior to taking pictures due to AUTO/
Red-eye reduction etc. It causes a malfunction.
•
When you take a picture beyond the available flash range, the exposure may not be adjusted
properly and the picture may become bright or dark.
•
When the flash is being charged, the flash icon blinks red, and you cannot take a picture even
when you press the shutter button fully. When [AUTO LCD OFF] is set, the LCD monitor
turns off and the power lamp lights.
•
The white balance may not be properly adjusted if the flash level is insufficient for the subject.
•
When the shutter speed is fast, the flash effect may not be sufficient.
•
When taking a picture with the flash, we recommend removing the lens hood. In some
cases it may not allow the scene to be illuminated properly.
•
It may take time to charge the flash if you repeat taking a picture. Take a picture after the
access indication disappears.
•
The red-eye reduction effect differs between people. Also, if the subject was far away from the
camera or was not looking at the first flash, the effect may not be evident.
•
Flash is fixed to [Œ] when the [CONVERSION]
(P93)
is set to [
] or [
].
Mode
Shutter speed (Sec.)
•
in
mode
1/8 to 1/2000th
•
in
mode
•
,
and
in
mode
•
:, ; and í in [SCENE MODE]
1 or 1/4 to 1/2000th
¢2
•
in
mode
•
in
mode
•
in
mode
•
and
in
mode
•
in
mode
•
in [SCENE MODE] (in shutter speed priority)
8 to 1/2000th
•
5 in [SCENE MODE]
15, 30, 60
•
4 in [SCENE MODE]
1/4, 2
¢3
C
DMC-FZ28P_PC.book 50 ページ ２００８年７月２日 水曜日 午後１１時１４分