Philips T-SMART DBS-EX23-530 - Manual (Page 79)

Programming Reference Alarm Settings
Revised April 2000 DBS-EX23-530 4-27
Parameter Relay Reset
Description Determines whether the ISDN alarm relay is cleared (opened) auto-
matically or manually.
If cleared automatically, the relay is opened approximately one sec-
ond after the alarm condition ceases.
If cleared manually, the relay can be opened by entering the Alarm
Relay Clear code.
To enter the Alarm Relay Clear code, first enter the programming
authorization code (#98 9999), then enter one of the following
codes:
(Master cabinet: ON/OFF #94 8)
(Slave cabinet: ON/OFF #95 8)
Programming Master cabinet: FF1 9# 4# 4# 4# 6# (0-1)#
Slave cabinet: FF1 9# 4# 5# 4# 6# (0-1)#
Options 0=Auto
1=Manual