National Instruments NI CVS-1450 Series - Manual (Page 32)

Chapter 2 Setup and Configuration
NI CVS-1450 Series User Manual 2-18 ni.com
3. Enter the new IP address in the Machine Name/IP field, and
click OK.
4. Click the Open button.
5. Navigate to < LabVIEW>\examples\IMAQ .
6. Double-click IMAQ1394 examples.llb and select Grab.vi .
7. Click the Run button to begin acquiring images.
Now that you are acquiring images in LabVIEW, you can use the Vision
Development Module and the installed CVS-1450 device drivers to process
images and control inputs and outputs.