National Instruments NI CVS-1450 Series - Manual (Page 81)

Appendix C Mounting Information
NI CVS-1450 Series User Manual C-4 ni.com
Complete the following steps to secure the CVS-1450 device to your
mount:
1. Align the screw holes of your mounting bracket with the four holes on
the back of the CVS-1450 device. Figure C-1 shows the location of the
mounting holes on the CVS-1450.
2. Insert four 4-40 UNC screws and tighten them until they are secure
(3.5 in.-lb). Make sure that the heads of the screws are flush with the
mounting bracket.