National Instruments NI CVS-1450 Series - Manual (Page 78)

© National Instruments Corporation C-1 NI CVS-1450 Series User Manual
C
Mounting Information
This appendix provides the information necessary to create a custom mount
for the NI CVS-1450 Series.
If you do not want to create a custom mount, a panel and DIN rail mount
kit for the CVS-1450 Series is available from National Instruments (part
number 189154-01).
Mounting the CVS-1450 Series
If you want to create a custom mount, Figures C-1–C-4 provide
dimensional drawings and clearance information for the CVS-1450 Series.
Caution If you choose not to mount the CVS-1450 device on a DIN rail or flat surface, do
not position the CVS-1450 device with the heat sinks resting on any surface. Doing so may
cause the CVS-1450 device to overheat. Refer to Appendix B,
Specifications , for
temperature specifications.
Figure C-1. Back View of the CVS-1450 Series with Dimensions
49.28 mm
(1.940 in.)
19.74 mm
(0.777 in.)
1.52 mm
(0.06 in.) 20.32 mm
(0.80 in.)
24.64 mm
(0.97 in.)
63.42 mm
(2.497 in.)
4X 4-40 UNC
Max Depth 5.08 mm (0.20 in.)
Mounting Holes for DIN Rail
and Panel Mount Kit