Appendix b specifications, Specifications – National Instruments NI CVS-1450 Series User Manual
Page 73
© National Instruments Corporation
B-1
NI CVS-1450 Series User Manual
B
Specifications
This appendix lists the specifications of the NI CVS-1450 Series. These
specifications are typical at 25 °C, unless otherwise noted.
Power Requirements
Main supply voltage............................... 24 VDC ±10%
Power (excluding cameras)............. 12 W, typical
22 W, maximum
IEEE 1394 bus power ..................... 18 W, maximum
(shared by all three ports)
Isolated supply
1
...................................... 5 to 30 VDC
Memory
SDRAM ................................................. 128 MB
Nonvolatile storage
CVS-1454 ....................................... 32 MB
CVS-1455 ....................................... 128 MB
CVS-1456 ....................................... 256 MB
Processor
CVS-1454............................................... Intel Celeron 400 MHz processor
CVS-1455............................................... Intel Celeron 650 MHz processor
CVS-1456............................................... Intel Celeron 733 MHz processor
1
Do not draw more than 500 mA combined from the Viso pins on the 44-pin DSUB connector. Do not draw more than 100 mA
from 24V or 30V isolated outputs. Do not draw more than 50 mA from 5V isolated outputs.