National Instruments SCB-68 - Manual (Page 102)

Index
SCB-68 Shielded Connector Block User Manual I-6 ni.com
nonreferenced or floating signal sources
bias resistors, 3-7
description, 3-3
description (figure), 3-2
differential connections, 3-3, 3-7 to 3-8
recommended configuration (figure), 3-2
single-ended connections (RSE input
mode), 3-3, 3-9
NRSE (nonreferenced single-ended input).
See single-ended connections
O
one-pole lowpass RC filter, 5-10 to 5-11
open thermocouple detection, 5-5 to 5-7
differential, 5-6
single-ended, 5-6
sources of error, 5-6 to 5-7
P
parts locator diagram (figure), 1-5, 2-2
PFI0/TRIG1 signal conditioning (figure), 5-4
physical specifications, A-2
pin assignments
SCB-68 E Series I/O Connector pinout
(extended AI) (figure), 1-9
SCB-68 E Series I/O Connector pinout
(extended digital) (figure), 1-10
SCB-68 E Series I/O Connector pinout
(full) (figure), 1-8
power
fuse and power, C-1
power requirement specifications, A-1
Q
quick reference label, 1-2 to 1-4, B-1 to B-8
analog output (AO) devices (table), 1-3
digital I/O (DIO) devices (table), 1-3
E series devices (table), 1-2 to 1-3, B-2
NI 653X devices (table), B-7
NI 660X devices (table), B-6
NI 670X devices (table), B-3
NI 671X/673X devices (table), B-4
NI 7811R/7831R devices (table), B-8
other devices (table), 1-4
real-time (RT) devices (table), 1-3
S series devices (table), 1-4, B-5
timing I/O (TIO) devices (table), 1-4
R
real-time (RT) devices, quick reference label
(table), 1-3
referenced single-ended input (RSE).
See single-ended connections
requirements for getting started, 1-1 to 1-2
resolution and accuracy of voltage
measurement, 5-5
RSE (referenced single-ended input).
See single-ended connections
S
S series devices, quick reference label (table),
1-4, B-5
safety information, 1-11 to 1-13
safety specifications, A-3
SCB-68
See also installation
configuration
switch configuration, 1-11
using Measurement & Automation
Explorer (MAX), 1-11
overview, 1-1
parts locator diagram (figure), 1-5, 2-2
quick reference label, B-1 to B-8
quick reference label (table), 1-2 to 1-4
requirements for getting started,
1-1 to 1-2