National Instruments SCB-68 - Manual (Page 72)

Chapter A Specifications
© National Instruments Corporation A-3 SCB-68 Shielded Connector Block User Manual
Safety
The SCB-68 meets the requirements of the following standards for safety
and electrical equipment for measurement, control, and laboratory use:
• IEC 61010-1, EN 61010-1
• UL 3111-1
• CAN/CSA C22.2 No. 1010.1
Note For UL and other safety certifications, refer to the product label or to ni.com .
Electromagnetic Compatibility
Emissions ............................................... EN 55011 Class A at 10 m
FCC Part 15A above 1 GHz
Immunity ................................................ EN 61326-1:1997 + A1:1998,
Table 1
EMC/EMI............................................... CE, C-Tick, and FCC Part 15
(Class A) Compliant
Note For EMC compliance, you must operate this device with shielded cabling.
CE Compliance
This product meets the essential requirements of applicable European
Directives, as amended for CE Marking, as follows:
Low-Voltage Directive (safety) ............. 73/23/EEC
Electromagnetic Compatibility
Directive (EMC) .................................... 89/336/EEC
Note Refer to the Declaration of Conformity (DoC) for this product for any additional
regulatory compliance information. To obtain the DoC for this product, click Declaration
of Conformity at
ni.com/hardref.nsf/ . This Web site lists the DoCs by product
family. Select the appropriate product family, followed by your product, and a link to
the DoC appears in Adobe Acrobat format. Click the Acrobat icon to download or read
the DoC.