Northern UTA220/UTA220k - Manual (Page 132)

B-2
UTA220/UTA220k
Factory Default Settings
DCD Pin Option Always On
CTS Pin Option CTS follows RTS
Protocol Option V.120
Auto Answer On
S Reg #0: Rings Until Answer 1
S Reg #2: Escape Character 43
S Reg #3: Carriage Return Character 13
S Reg #4: Line Feed Character 10
S Reg #5: Backspace Character 8
S Reg #7: Wait for Connect 30, Units = seconds
S Reg #10: DCD Drop Time 0, Units = 1/10 second
S Reg #12: Guard Time 50, Units = 1/50 second
S Reg #25: DTR Detect Time 5, Units = 1/100 second
S Reg #26: RTS to CTS Time 1, Units = 1/100 second
Originate Option Originate Normal
Answer Option Answer Normal
Local Echo On
Status Displays On
Verbose Display Verbose
Connect Message Setting All Messages
Flow Control No Flow Control
Reset Flow Control Disabled
Powerup User Profile Profile 0
Dialing Method ENBLOC
Telephone Numbers 1-10 NULL
Echo Disable Tone Off
V.120 Maximum Transmit Frame Size 256
V.120 Maximum Receive Frame Size 256
V.120 Window Size 8
V.120 T200 Retransmit Timer 1
Table B-1: UTA 220 Default Parameter Options (Continued)