Northern UTA220/UTA220k - Manual (Page 95)

UTA220/UTA220k
12-19
D-Channel X.25
Parameter 1: Pad Recall Character
This parameter designates the PAD recall character. PAD
recall allows for escape from the PAD data transfer mode or
connect-in-progress mode to the PAD command mode in order
to execute a PAD command. Only one PAD command can be
executed after the PAD has escaped to the PAD command
mode. Once executed, the PAD returns to the previous mode
(i.e., data transfer or connect in progress). If parameter 5 is set
to 1, when PAD recall is executed, the PAD will output an
XOFF before displaying the PAD prompt.
* default
10 Line folding 0 0
11 Binary speed of DTE - -
12 Flow control of PAD by DTE 0 1
13 Line feed insertion after carriage re-
turn 0 0
14 Padding after line feed 0 0
15 Editing 0 0
16 Character delete 127 127
17 Line delete 24 24
18 Line display 18 18
19 Editing PAD service signals 1 1
20 Echo mask 0 0
Table 12-7: PAD Recall Character
Value Description
0 No character will result in PAD recall in either the data transfer or
connect-in-progress mode
1 PAD recall character = DLE. The character DLE (10H) can be used
for PAD recall. (DLE = Ctrl P) *
Table 12-6: CCITT X.3 Parameter Profiles (Continued)