Interface card removal – Northern UTA220/UTA220k User Manual
Page 28
Advertising
3-4
UTA220/UTA220k
Getting Started
Note: Ensure that both slide switches on the interface card
are in the same position.
Figure 3-4. V.35 EIA-232 interface Card
Interface Card Removal
The port 1 V.35/EIA-232 interface card must be removed from
the UTA220 to change the DIP switch settings.
Note: Do not remove the port 2 interface card. The port 2 DIP
switch can be accessed without removing the card.
Advertising