Northern UTA220/UTA220k - Manual (Page 147)

UTA220/UTA220k
C-13
AT Command Set
%L13= Line feed insertion after
carriage return 0 None
1 after <CR> to DTE
2 after <CR> from DTE
4 after echo of <CR>
default (0,0,0)
%L14= Padding after line feed Range: 0-255 default (0,0,0)
%L15= Editing in Data Transfer 0 None
1 Edit
%L16= Character Delete Range: 0-127 default (8,127,127)
%L17= Line Delete Range: 0-127 default (24,24,24)
%L18= Line Display Range: 0-127 default (18,18,18)
%L19= Editing PAD Service
Signals 0 None
1 Printers
2 Displays
default (2,1,1)
%L20= Echo Mask 0 None
1 No echo of <CR>
2 No echo of <LF>
4 No echo of <VT>, <HT>,
<FF>
8
No echo of <BEL> and <BS>
16 No echo of <ESC> and
<ENQ>
32
No echo of <ACK>, <NAK>,
<STX>,<SOH>, <EOT>,
<ETB>, <ETX>
64 No echo of parameters 16,
17,
and 18
128 No echo of <NUL>, <SO>,
<SI>,
<DLE>,<DC1>,
<DC2>,<DC3>,
<DC4>,<SYN>, <CAN>,
<EM>,
<SUB>,<FS>, <GS>, <RS>,
<US>
default (248,0,0)
%L21= Parity 0 None
3 Use @P3
default (0,0,0)
Table C-1: UTA 220 AT Command Set (Continued)
Command Description Value
*Note: "by port" indicates that these switch parameters are associated with a
particular port. However, this does not exclude ports from sharing the same
SPID or TEI.+